Improve GIS support

[gpl/argeo-slc.git] / modules / gis / org.argeo.slc.gis.position.ui / META-INF / registryFile.jai

diff --git a/modules/gis/org.argeo.slc.gis.position.ui/META-INF/registryFile.jai b/modules/gis/org.argeo.slc.gis.position.ui/META-INF/registryFile.jai
new file mode 100644 (file)
index 0000000..76e43bb
--- /dev/null
+++ b/modules/gis/org.argeo.slc.gis.position.ui/META-INF/registryFile.jai
@@ -0,0 +1,225 @@
+#
+# The registry file for Geotools Grid Coverage implementation. This file should be automatically
+# parsed by JAI under initialization. If it is not, then Registry.registerServices(...) can parse
+# it. This may happen if this file is unreachable from the JAI class loader.
+#
+# If this file is updated, remember to update Registry.registerServices(...) accordingly.
+#
+# Version: $Id: registryFile.jai 34781 2010-01-13 11:56:07Z simonegiannecchini $
+#
+##################################################################################################
+#
+# Each line can be in one of the formats described below. Space or tab characters separate
+# keywords in each line. The comment character is '#'; on each line all characters following
+# the first comment character are ignored. The file must be encoded in UTF-8.
+#
+# 1. To register descriptors :
+#
+#      descriptor <descriptor-class-name>
+#
+# 2. To register factory objects under a product against a specific mode :
+#
+#      <registry-mode-name>  <factory-class-name>  <product-name>  <descriptor-name>  <local-name>
+#
+#    The <local-name> is (only) used later on in this file to set preferences
+#    between factory objects, if wanted.
+#
+##################################################################################################
+#
+# Image operation descriptors :
+#
+descriptor  org.geotools.image.jai.CombineDescriptor
+descriptor  org.geotools.image.jai.HysteresisDescriptor
+descriptor  org.geotools.image.jai.NodataFilterDescriptor
+descriptor  org.geotools.image.palette.ColorReductionDescriptor
+descriptor  org.geotools.image.palette.ColorInversionDescriptor
+
+
+#
+# "rendered" factory objects
+#
+rendered  org.geotools.image.jai.CombineCRIF                   org.geotools  org.geotools.Combine       Combine
+rendered  org.geotools.image.jai.HysteresisCRIF                org.geotools  org.geotools.Hysteresis    Hysteresis
+rendered  org.geotools.image.jai.NodataFilterCRIF              org.geotools  org.geotools.NodataFilter  NodataFilter
+rendered  org.geotools.image.palette.ColorReductionCRIF        org.geotools  org.geotools.ColorReduction ColorReduction
+rendered  org.geotools.image.palette.ColorInversionCRIF        org.geotools  org.geotools.ColorInversion ColorInversion
+#
+# The registry file for Geotools Grid Coverage implementation. This file should be automatically
+# parsed by JAI under initialization. If it is not, then Registry.registerServices(...) can parse
+# it. This may happen if this file is unreachable from the JAI class loader.
+#
+# If this file is updated, remember to update Registry.registerServices(...) accordingly.
+#
+# Version: $Id: registryFile.jai 34781 2010-01-13 11:56:07Z simonegiannecchini $
+#
+##################################################################################################
+#
+# Each line can be in one of the formats described below. Space or tab characters separate
+# keywords in each line. The comment character is '#'; on each line all characters following
+# the first comment character are ignored. The file must be encoded in UTF-8.
+#
+# 1. To register descriptors :
+#
+#      descriptor <descriptor-class-name>
+#
+# 2. To register factory objects under a product against a specific mode :
+#
+#      <registry-mode-name>  <factory-class-name>  <product-name>  <descriptor-name>  <local-name>
+#
+#    The <local-name> is (only) used later on in this file to set preferences
+#    between factory objects, if wanted.
+#
+##################################################################################################
+#
+# Image operation descriptors :
+#
+descriptor  org.geotools.image.jai.CombineDescriptor
+descriptor  org.geotools.image.jai.HysteresisDescriptor
+descriptor  org.geotools.image.jai.NodataFilterDescriptor
+descriptor  org.geotools.image.palette.ColorReductionDescriptor
+descriptor  org.geotools.image.palette.ColorInversionDescriptor
+
+
+#
+# "rendered" factory objects
+#
+rendered  org.geotools.image.jai.CombineCRIF                   org.geotools  org.geotools.Combine       Combine
+rendered  org.geotools.image.jai.HysteresisCRIF                org.geotools  org.geotools.Hysteresis    Hysteresis
+rendered  org.geotools.image.jai.NodataFilterCRIF              org.geotools  org.geotools.NodataFilter  NodataFilter
+rendered  org.geotools.image.palette.ColorReductionCRIF        org.geotools  org.geotools.ColorReduction ColorReduction
+rendered  org.geotools.image.palette.ColorInversionCRIF        org.geotools  org.geotools.ColorInversion ColorInversion
+#
+# The registry file for Geotools Grid Coverage implementation. This file should be automatically
+# parsed by JAI under initialization. If it is not, then Registry.registerServices(...) can parse
+# it. This may happen if this file is unreachable from the JAI class loader.
+#
+# If this file is updated, remember to update Registry.registerServices(...) accordingly.
+#
+# Version: $Id: registryFile.jai 34781 2010-01-13 11:56:07Z simonegiannecchini $
+#
+##################################################################################################
+#
+# Each line can be in one of the formats described below. Space or tab characters separate
+# keywords in each line. The comment character is '#'; on each line all characters following
+# the first comment character are ignored. The file must be encoded in UTF-8.
+#
+# 1. To register descriptors :
+#
+#      descriptor <descriptor-class-name>
+#
+# 2. To register factory objects under a product against a specific mode :
+#
+#      <registry-mode-name>  <factory-class-name>  <product-name>  <descriptor-name>  <local-name>
+#
+#    The <local-name> is (only) used later on in this file to set preferences
+#    between factory objects, if wanted.
+#
+##################################################################################################
+#
+# Image operation descriptors :
+#
+descriptor  org.geotools.image.jai.CombineDescriptor
+descriptor  org.geotools.image.jai.HysteresisDescriptor
+descriptor  org.geotools.image.jai.NodataFilterDescriptor
+descriptor  org.geotools.image.palette.ColorReductionDescriptor
+descriptor  org.geotools.image.palette.ColorInversionDescriptor
+
+
+#
+# "rendered" factory objects
+#
+rendered  org.geotools.image.jai.CombineCRIF                   org.geotools  org.geotools.Combine       Combine
+rendered  org.geotools.image.jai.HysteresisCRIF                org.geotools  org.geotools.Hysteresis    Hysteresis
+rendered  org.geotools.image.jai.NodataFilterCRIF              org.geotools  org.geotools.NodataFilter  NodataFilter
+rendered  org.geotools.image.palette.ColorReductionCRIF        org.geotools  org.geotools.ColorReduction ColorReduction
+rendered  org.geotools.image.palette.ColorInversionCRIF        org.geotools  org.geotools.ColorInversion ColorInversion
+#
+# The registry file for Geotools Grid Coverage implementation. This file should be automatically
+# parsed by JAI under initialization. If it is not, then Registry.registerServices(...) can parse
+# it. This may happen if this file is unreachable from the JAI class loader.
+#
+# If this file is updated, remember to update Registry.registerServices(...) accordingly.
+#
+# Version: $Id: registryFile.jai 34781 2010-01-13 11:56:07Z simonegiannecchini $
+#
+##################################################################################################
+#
+# Each line can be in one of the formats described below. Space or tab characters separate
+# keywords in each line. The comment character is '#'; on each line all characters following
+# the first comment character are ignored. The file must be encoded in UTF-8.
+#
+# 1. To register descriptors :
+#
+#      descriptor <descriptor-class-name>
+#
+# 2. To register factory objects under a product against a specific mode :
+#
+#      <registry-mode-name>  <factory-class-name>  <product-name>  <descriptor-name>  <local-name>
+#
+#    The <local-name> is (only) used later on in this file to set preferences
+#    between factory objects, if wanted.
+#
+##################################################################################################
+#
+# Image operation descriptors :
+#
+descriptor  org.geotools.image.jai.CombineDescriptor
+descriptor  org.geotools.image.jai.HysteresisDescriptor
+descriptor  org.geotools.image.jai.NodataFilterDescriptor
+descriptor  org.geotools.image.palette.ColorReductionDescriptor
+descriptor  org.geotools.image.palette.ColorInversionDescriptor
+
+
+#
+# "rendered" factory objects
+#
+rendered  org.geotools.image.jai.CombineCRIF                   org.geotools  org.geotools.Combine       Combine
+rendered  org.geotools.image.jai.HysteresisCRIF                org.geotools  org.geotools.Hysteresis    Hysteresis
+rendered  org.geotools.image.jai.NodataFilterCRIF              org.geotools  org.geotools.NodataFilter  NodataFilter
+rendered  org.geotools.image.palette.ColorReductionCRIF        org.geotools  org.geotools.ColorReduction ColorReduction
+rendered  org.geotools.image.palette.ColorInversionCRIF        org.geotools  org.geotools.ColorInversion ColorInversion
+#
+# The registry file for Geotools Grid Coverage implementation. This file should be automatically
+# parsed by JAI under initialization. If it is not, then Registry.registerServices(...) can parse
+# it. This may happen if this file is unreachable from the JAI class loader.
+#
+# If this file is updated, remember to update Registry.registerServices(...) accordingly.
+#
+# Version: $Id: registryFile.jai 34781 2010-01-13 11:56:07Z simonegiannecchini $
+#
+##################################################################################################
+#
+# Each line can be in one of the formats described below. Space or tab characters separate
+# keywords in each line. The comment character is '#'; on each line all characters following
+# the first comment character are ignored. The file must be encoded in UTF-8.
+#
+# 1. To register descriptors :
+#
+#      descriptor <descriptor-class-name>
+#
+# 2. To register factory objects under a product against a specific mode :
+#
+#      <registry-mode-name>  <factory-class-name>  <product-name>  <descriptor-name>  <local-name>
+#
+#    The <local-name> is (only) used later on in this file to set preferences
+#    between factory objects, if wanted.
+#
+##################################################################################################
+#
+# Image operation descriptors :
+#
+descriptor  org.geotools.image.jai.CombineDescriptor
+descriptor  org.geotools.image.jai.HysteresisDescriptor
+descriptor  org.geotools.image.jai.NodataFilterDescriptor
+descriptor  org.geotools.image.palette.ColorReductionDescriptor
+descriptor  org.geotools.image.palette.ColorInversionDescriptor
+
+
+#
+# "rendered" factory objects
+#
+rendered  org.geotools.image.jai.CombineCRIF                   org.geotools  org.geotools.Combine       Combine
+rendered  org.geotools.image.jai.HysteresisCRIF                org.geotools  org.geotools.Hysteresis    Hysteresis
+rendered  org.geotools.image.jai.NodataFilterCRIF              org.geotools  org.geotools.NodataFilter  NodataFilter
+rendered  org.geotools.image.palette.ColorReductionCRIF        org.geotools  org.geotools.ColorReduction ColorReduction
+rendered  org.geotools.image.palette.ColorInversionCRIF        org.geotools  org.geotools.ColorInversion ColorInversion